Software-Based Acoustical Measurements, Softcover reprint of the original 1st ed. 2017 Modern Acoustics and Signal Processing Series

Chapter 1. INTRODUCTION

1.1 Acoustical measurements

1.2 Instantaneous and effective (RMS) value

1.3 Sound pressure level

1.4 Equivalent level

1.4.1 Stabilization time for Leq

1.5 Weighted levels

1.6 Exceedance levels

1.6.1 Stabilization time for exceedance levels

1.7 Spectrum analysis

1.7.1 Constant percentage spectrum analyzer

1.7.2 Line spectrum analyzer

1.7.3 Line spectrum and time-frequency uncertainty

1.7.5 Band filters

1.7.6 Transient response of band filters

1.7.7 Parseval’s identity

1.7.8 Effect of spectrum tolerance on Parseval’s identity

1.7.9 Weighted levels computed from one-third octave bands

Chapter 2 UNCERTAINTY

2.1 Introduction

2.2 Resolution, precision, accuracy

2.3 Measurement method and procedure

2.4 Measurement model

2.5 Uncertainty

2.5.1 Type A Uncertainty

2.5.2 Type B uncertainty

2.5.3 Expanded uncertainty

2.5.4 Combined standard uncertainty

2.6 Examples

2.6.1 Relationship between uncertainties in level and pressure

2.6.2 Uncertainty in the correction of environmental conditions

2.6.3 Uncertainty in the calculation of the equivalent level

2.6.4 Uncertainty in A-weighting computed from octave spectrum

2.6.5 Uncertainty in the measurement of sound transmission loss

2.7 Uncertainty and resolution

2.8 Uncertainty and systematic error

2.8.1 Additive systematic error

2.8.3 Non linear systematic error

2.8.4 Uncorrected systematic errors

2.9 Chain calculation of uncertainty

Chapter 3 DIGITAL RECORDING

3.1 Introduction

3.2 Digital audio

3.3 Sampling

3.4 Digitization

3.5 Signal-to-noise ratio

3.6 Low-level distorsion

3.7 Dither

3.8 Jitter

3.9 D/A and A/D conversion

3.9.1 Digital / analog conversion

3.9.2 Analog / digital conversion

3.10 Pulse code modulation (PCM)

3.11 Differential pulse code modulation (DPCM)

3.12 Delta modulation (DM)

3.13 Sigma-delta modulation (SDM)

3.14 Digital recording devices

3.15 Sound file formats

3.15.1 WAV format

3.15.2 FLAC format

3.16 Project files

3.16.1 AUP format

3.16.2 AU format

3.16.3 AUF format

3.16.4 External access to audio data

3.17.1 Hard disk

3.17.2 Flash memory

3.17.3 Optical discs

3.17.4 Digital audio tape  (DAT)

3.18 File systems

3.18.1 FAT 32

3.18.2 NTFS

3.18.3 EXT4

3.18.4 HFS+

3.18.5 UDF

3.19 Long-term preservation

3.20 Conclusion

Chapter 4 DIGITAL AUDIO EDITING

4.1 Introduction

4.2 Audacity

4.2.1 Opening an existing file

4.2.2 Recoding sounds

4.2.3 Generating signals

4.2.4 Adding new tracks

4.2.5 Saving a project

4.2.6 Selection

4.2.7 Labels

4.2.8 Selection in the presence of labels

4.2.9 Calibration tone

4.2.10    FFT filters

4.2.11    Spectrogram and spectrum analysis

4.2.12    Noise removal

Chapter 5            TRANSDUCERS

5.1          Microphones

5.2          Polarization

5.3          Preamplifier

5.4          Sound fields

5.4.1      Free field

5.4.2      Diffuse field

5.4.3      Pressure field

5.4.4      Stationary field

5.5          Microphones and sound fields

5.7          Directional response pattern

5.8          Noise

5.9          Distortion

5.10        Micromachined microphones

5.10.1    Frequency response

5.11        Audiometric earphones

5.12        Omnidirectional sources

Chapter 6            DIGITAL SIGNAL PROCESSING

6.2          Discrete impulse

6.3          A signal as its convolution with a discrete impulse

6.4          Discrete systems

6.5          Finite- and infinite-impulse-response systems

6.6          Difference equation of a discrete system

6.7          Frequency response of a discrete system

6.8          Z transform of a discrete signal

6.10        Z transform of a convolution

6.11        Z transform and frequency response

6.12        Solution of a difference equation

6.13        Poles and stability of a discrete system

6.14        Inversion of a rational z transform

6.15        Continuous- to discrete-system bilinear conversion

7.1          Introduction

7.2          Opening a .wav file

7.3          Energy average and equivalent level

7.4          Calibration

7.5          Energy envelope

7.6          A weighting

7.7          Statistical analysis

Chapter 8            SPECTRUM ANALYSIS

8.1          Introduction

8.2          Spectrum analysis paradigms

8.3          Digital filters

8.4          Discrete Fourier transform (DFT)

8.5          Fast Fourier transform (FFT)

8.6          Spectrum analysis with the FFT

8.6.1      Line spectrum analysis

8.6.2      The problem of frequencies close to Fs/2

8.6.4      Precise detection of pure tones

8.6.5      Windows

8.6.6      FFT band spectrum analysis

8.6.7      Spectral density and spectrum averaging

8.7          FFT filters

8.8          Some applications of the FFT

8.8.1      Determination of tonality

8.8.2      FFT convolution

8.8.3      FFT correlation

8.8.5      Determination of transfer functions

8.9          Contrast of algorithms for use in measurments

8.9.1      International Standard IEC 61260

8.9.2      Contrasting algorithms

8.9.3      Procedure

8.9.4      Sound card calibration

8.9.5      Verification of the analyzer response

8.9.6      Contrast of different algorithms

8.9.7      Results

Chapter 9            TESTING OF DIGITAL RECORDERS

9.1          Introduction

9.2          Specifications of the digital recorder

9.3          Tests

9.3.1      Frequency response

9.3.2      Noise

9.3.3      Linearity

9.3.4      Transient response

9.3.6      Conclusions

Further readings

Appendix 1 Glossary and definitions on metrology

Appendix 2 Fundamentals of Statistics

Appendix 3 Statistical dispersion of the RMS value of a stationary noise as a function of the integrating time

Appendix 4 Statistical dispersion of the RMS value of a non-stationary noise  as a function of the integrating time

Appendix 5 Statistical dispersion of percentiles

Appendix 6 Envelope of a filtered noise

Appendix 7 Transient response of a third-order bandpass filter

Appendix 8 Combined uncertainty

Appendix 9 Example calculation of uncertainty in the case  of a non-linear systematic error

Appendix 10 The sampling theorem

Appendix 11 Structure of a FLAC file

Appendix 12 Document type definition (DTD)  for Audacity project files

Appendix 13 Brief description of Scilab

Appendix 14 Fast Fourier transform (FFT)

Appendix 15 Parseval’s identity and symmetry of the DFT

Appendix 16 Spectrum of window functions

Index

Provides a cost-effective, primarily open source solution to obtaining and analyzing acoustical measurements

Presents methods which are applicable to embedded systems running any system using free GPL software

Equips readers with a deep understanding of the central challenges in acoustical measurements including a discussion of uncertainty

Features comprehensive description of hardware, from the hard disk to flash memory, and from the digital recorder to the microphone and audiometric earphone

Includes a chapter on testing hardware to ensure standard compliance

Includes supplementary material: sn.pub/extras