Design for Creep (2nd Ed., 2nd ed. 1995)
Langue : Anglais
Auteurs : Penny R.K., Marriott D.L.
Our rationale for the second edition remains the same as for the first edition, which appeared over twenty years ago. This is to offer simplified, useful and easily understood methods for dealing with the creep of components operating under conditions met in practice. When the first edition was written, we could not claim that the methods which were introduced were well-tried. They were somewhat conjectural, although firmly based, but not sufficiently well devel oped. Since that time, the Reference Stress Methods (RSM) introduced in the book have received much scrutiny and development. The best recognition we could have of the original methods is the fact that they are now firmly embedded in codes of practice. Hopefully, we have now gone a long way towards achieving our original objectives. There are major additions to this second edition which should help to justify our claims. These include further clarification regarding Reference Stress Methods in Chapter 4. There are also new topics which depend on RSM in varying degrees: ? Creep fracture is covered in Chapter 7, where methods for assessing creep crack initiation and crack growth are fully described. This chapter starts with a review of the basic concepts of fracture mechanics and follows with useful, approximate methods, compatible with the needs of design for creep and the availability of standard data. ? Creep/fatigue interactions and environmental effects appear in Chapter 8.
Preface. Introduction. Factors affecting strain accumulation. Methods of analysis for constant loading and temperature conditions. Solutions to problems encountered in practice. Continuum damage. Extrapolation of creep strain and rupture data. Creep fracture. Creep/fatigue/environmental interactions. High temperature design procedures. Appendices. Index.
Although the fundamentals of creep deformation, continuum damage and cracking, and methods of component analysis are described, there is substantial additional material concerning the concepts underlying damage and cracking as well as an update, review and analysis of developments of high temperature design methods in the last 20 years. There is also a discussion of the codes of practice or guidelines used internationally.
Date de parution : 10-2012
Ouvrage de 430 p.
15.5x23.5 cm
Date de parution : 07-1995
Ouvrage de 430 p.
15.5x23.5 cm
Thème de Design for Creep :
Mots-clés :
damage; deformation; design; development; fatigue; finite element method; fracture; fracture mechanics; iron; material; mechanics; modeling; stress; structural analysis; temperature
© 2024 LAVOISIER S.A.S.